+7 495 664 27 26
14, Pohodniy proezd
Moscow
Russia
125373
14, Pohodniy proezd
Moscow
Russia
125373
VESTASYSTEMS
Bi-filding door SL 97
Thermal insulation that saves the maximal volume of energy
SL 97 – thermally insulated turn-and-slide system with combined profile of wood and aluminum
Structure
High-level of thermal insulation in SL97 is achieved thanks to combination of wood and aluminum. Glued wood with additional layer of insulation and triple glazing.
Advantages:
- Thermally insulated system
- Combined profile of wood and aluminum
- Profile of glued wood with ventilated aluminum covers and additional layer of insulation
- The system is equipped with an undercarriage
- Undercarriage and guide rails integrated into the system
- All versions are equipped with a pivoting mechanism with the ability to fold the leaves inward or outward and slide to the left or right
- Standard woods: pine or spruce, other woods possible
Technical information
The running gear made of stainless steel with double-row deep groove ball bearings is characterized by smooth running and low noise level, height adjustment is possible during the installation of the structure. Optimal load transfer to the chassis and guides allows flawless operation even with heavy panel weights. The entire stainless steel undercarriage requires little maintenance and is extremely durable.
The special Solarlux drive with 24mm up and down frame travel ensures reliable operation. Locking control by means of a sealed contact as well as a hidden cable can be implemented both in accordance with the RC2 standard and in accordance with the RC2N standard.
The TWINX pass-through panels is a hidden centering mechanism, which is a continuous panel structure (only the top and bottom hinges are visible). This allows the panels to be centered relative to each other, stabilizing them at high wind loads.
The special Solarlux drive with 24mm up and down frame travel ensures reliable operation. Locking control by means of a sealed contact as well as a hidden cable can be implemented both in accordance with the RC2 standard and in accordance with the RC2N standard.
The TWINX pass-through panels is a hidden centering mechanism, which is a continuous panel structure (only the top and bottom hinges are visible). This allows the panels to be centered relative to each other, stabilizing them at high wind loads.
Specification
- Maximal panel height up to 2800 mm
- Maximal panel width 1000 mm
- Construction depth 96 mm
- Visible width 184 mm
- Frame height from 45 to 108 mm
- Glazing thickness from 24 to 46 mm
- Thermal transmission coefficient: Uw≥ 0,8 W/m2 K
- Panel weight 100 kg
Extra accessories
Shading system: plisse by Solarlux provides optimal protection against direct sun rays. Plisse can be fixed in any position, thus limiting the view. Plisse is standardly fixed on profile without additional holes or gluing.
Illuminated floor guides:
Guides can be equipped with protective profile 3S-Protection with LED lighting and cable channel for concealed installation. Such illumination helps visually impaired people to orientate, which meets the requirements of DIN 18040 for entrance areas and passages.
Equipment packages: Equipment packages are available for the tilt & slide system, combining various elements and parts.
Security, sound insulation, thermal insulation and lighting.
Illuminated floor guides:
Guides can be equipped with protective profile 3S-Protection with LED lighting and cable channel for concealed installation. Such illumination helps visually impaired people to orientate, which meets the requirements of DIN 18040 for entrance areas and passages.
Equipment packages: Equipment packages are available for the tilt & slide system, combining various elements and parts.
Security, sound insulation, thermal insulation and lighting.
Color structure
Possible combinations
©VESTASYSTEMS. All rights reserved.