Faсade system Renson Linius

The Linius continuous façade cladding system consists of an aluminium bearing structure with aluminium lamellas.
It gives the façade an impressive aesthetic, combining perfectly with other materials. In addition to its appearance, the simple and reliable design provides good ventilation, effective weather protection, additional sound insulation and shielding.

STRUCTURE

Faсade system Linius consists of bearing structure with lamellas installed. The bearing structure supports the entire louvered structure and is formed from vertical or horizontal supports, which are fixed with brackets at specific distances. Renson offers different types of supports depending on the structure. The lamella holders are fixedly attached to the supports and the lamellas are fixed to the holders. The design is simple and well tested.

Advantages:

Screening – possibility to conceal unattractive equipment
Sound protection
Aesthetic look
Extruded aluminium alloy EN AW 6063 T66
Anodized (20 micron)
Polyester powder coating with RAL Syntha Pulvin colors (60 - 80 micron/40 micron (UK))

PURPOSE OF A CONTINUOUS LOUVERS SYSTEM

Screening. Ideal to hide unattractive equipment
Ventilation. System that keeps air flowing and prevents from rain
Weather protection
Sound protection. Continuous louvre system with sound absorbing lamellas is ideal for screening noise equipment. Structure of louvres system provides effective sound protection as well as good ventilation
Aesthetic facade
Interior use. Interior decoration with possible lighting

Linius structure

Bearing wall
Insulation
CLS
Aluminium support structures
Clamps
Profiles Linius

Specification L.033.1

Step 33,3 mm
Depth 20,4 mm
Height 37,5 mm
К-factor 22,68
Visually free area 59%
Physically free area 44,7%
Maximal supportless distance between posts 800 mm

TECHNICAL PECULIARITIES L.033.1

Extruded aluminum profile for use in light operating conditions with a step of 33.3 mm. Usually used for small areas of the surface. Extruded aluminium alloy EN AW 6063 T66.

Surface treatment:

• Anodized (20 micron)
• Polyester powder coating with RAL or Syntha Pulvin colors (60 - 80 micron/40 micron (UK))
Net is fixed to the back side of the bearing structure and combine with lamella L.033IM1. Lamella L.033.01 also can be banded with radius of 800 mm.
Lamella holders:
• Single lamella holder: type L.033.11 (width: 30 mm)
• Double lamella holder for thermal expansion: type L.033.12 (width: 34 mm)

Specification L.033V

Step 33,3 mm
Depth 39,6 mm
Height 37,6 mm
К-factor 61,04
Visually free area 60%
Physically free area 43%
Maximal supportless distance between posts 800 mm

TECHNICAL PECULIARITIES L.033V

Extruded aluminium profile with step 33.3 mm. Can be used in high risk conditions, for example, high voltage blocks with limited access. Small format for high sustainability to weather conditions. Lamella L.033V can be used in combination with lamellas L.033.01 due to the same look.

Specification L.033.08

Step 33,3 mm
Depth 20.4 mm
Height 42.3 mm
К-factor 123,46
Visually free area 56%
Physically free area 26%
Maximal supportless distance between posts 950 mm

TECHNICAL PECULIARITIES L.033.8

Extruded aluminium profile with step 33.3 mm. Can be used in high risk conditions, for example, high voltage blocks with limited access. Small format for high sustainability to weather conditions. Lamella L.033.8 can be used in combination with lamellas L.033.01 due to the same look.

Specification L.033IM1

Step 33,3 mm
Depth 20,4 mm
Height 38,2 mm
К-factor 34,7
Visually free area 59%
Physically free area 24%
Maximal supportless distance between posts 1350 mm

TECHNICAL PECULIARITIES L.033IM1

Extruded aluminium profile with integrated insect net. Lamella with step 33.3 mm clamps on the standard holder. Lamella L.033IM1 perfectly combines with standard lamella L.033.01 and closed lamella L.033CL.

Surface treatment:

• Anodized (20 micron)
Polyester powder coating with RAL or Syntha Pulvin colors (60 - 80 micron/40 micron (UK))
Lamella holders:
• Single lamella holder: type L.033.11 (width: 30 mm)
• Double lamella holder for thermal expansion: type L.033.12 (width: 34 mm) (joining element for two lamellas)

Specification L.033HF

Step 33,3 mm
Depth 20,4 mm
Height 37,5 mm
К-factor 22,46
Visually free area 59%
Physically free area 50%
Maximal supportless distance between posts 800 mm

TECHNICAL PECULIARITIES L.033HF

Lamella made of extruded aluminium alloy EN AW 6063 T66. Net is fixed on bearing structure.

Surface treatment:

• Anodized (20 micron)
• Polyester powder coating with RAL or Syntha Pulvin colors (60 - 80 micron/40 micron (UK))

Lamella holders:

• Single lamella holder: type L.033.11 (width: 30 mm)
• Double lamella holder for thermal expansion: type L.033.12 (width: 34 mm) (joining element for two lamellas)

Specification L.033CL

Step 33,3 mm
Depth 20,4 mm
Height 38,2 mm
Maximal supportless distance between posts 1400 mm

TECHNICAL PECULIARITIES L.033CL

Lamella made of extruded aluminium alloy EN AW 6063 T66. Net is fixed on bearing structure.

Surface treatment:

• Anodized (20 micron)
• Polyester powder coating with RAL Syntha Pulvin colors (60 - 80 micron/40 micron (UK))

Lamella holders:

• Single lamella holder: type L.033.11 (width: 30 mm)
• Double lamella holder for thermal expansion: type L.033.12 (width: 34 mm) (joining element for two lamellas)

Specification L.050.00

Step 50 mm
Depth 41,0 mm
Height 56,0 mm
К-factor 12,57
Visually free area 70%
Physically free area 49%

Surface treatment:
• Anodized (20 micron)
• Polyester powder coating with RAL Syntha Pulvin colors (60 - 80 micron/40 micron (UK))

TECHNICAL PECULIARITIES L.050.00

Strong profile made of extruded aluminium with step 50 mm. Various step between 50 – 100 mm can be implemented with lamella holders L.050.13 and L.050.14.
Net is fixed on back side of the bearing structure or combines with lamella L.050IM1.
Lamella holders for step 50 mm
• Single lamella holder: type L.050.11 (width 28 mm)
• Double lamella holder for thermal expansion: type L.050.12 (width 34 мм) (joining element for two lamellas)
• Lamella holder for various step of 50 - 100 mm
• Single lamella holder: type L.050.13 (width 28 mm)
• Double lamella holder for thermal expansion: type L.050.14 (width 34 мм) (joining element for two lamellas)

Construction color

Linus profiles are available in all RAL colors. Renson recommends the use of a structured lacquer for an architecturally modern look. In addition, the textured lacquer finish is better suited for outdoor use and is less likely to be scratched.

MENU